Locate the specific source (often MediaFire or community forums like Teletek ) where the firmware is hosted.
Use a USB flash drive (ideally 8GB or smaller) and format it to FAT32 .
Do not turn off the power during this process. The TV will reboot once finished.
Multi-part RAR files are a single archive split into smaller pieces. You cannot use "Part 3" by itself; you must have in the same folder.
Copy the extracted firmware file (e.g., all_upgrade_v510.bin ) directly to the root directory of the USB. Do not put it inside a folder. Step 4: Installation Guide Turn off your IRIS SAT TV and unplug the power cord. Insert the USB drive into the TV's USB port.
Right-click on and select "Extract Here" using WinRAR or 7-Zip .
The software will automatically pull data from Part 2 and Part 3 to create a single usable file (usually ending in .bin or .pkg ).
Plug the TV back in. Some models will detect the file and start flashing automatically.
Locate the specific source (often MediaFire or community forums like Teletek ) where the firmware is hosted.
Use a USB flash drive (ideally 8GB or smaller) and format it to FAT32 .
Do not turn off the power during this process. The TV will reboot once finished.
Multi-part RAR files are a single archive split into smaller pieces. You cannot use "Part 3" by itself; you must have in the same folder.
Copy the extracted firmware file (e.g., all_upgrade_v510.bin ) directly to the root directory of the USB. Do not put it inside a folder. Step 4: Installation Guide Turn off your IRIS SAT TV and unplug the power cord. Insert the USB drive into the TV's USB port.
Right-click on and select "Extract Here" using WinRAR or 7-Zip .
The software will automatically pull data from Part 2 and Part 3 to create a single usable file (usually ending in .bin or .pkg ).
Plug the TV back in. Some models will detect the file and start flashing automatically.